Compact Substation EPC Procurement Guide — IEC 62271-202

Procurement Guide

Compact Substation EPC Procurement Guide

Complete engineering guide for specifying prefabricated compact substations (11kV / 22kV / 33kV) for EPC contractors, industrial parks, utility distribution, and renewable energy projects. Compliant with IEC 62271-202.

작성자: 수석 전기 엔지니어링 팀 검증 및 지방 인증
허페이 고전압 변압기 연구소 · IEC 60076 및 IEEE C57 표준 준수 · 2026년 10월 업데이트

Prefabricated compact substations (also known as package substations, kiosk substations, or outdoor transformer stations) combine medium-voltage switchgear, a step-down distribution transformer, and low-voltage distribution panels inside a single factory-tested, pre-wired, weatherproof housing.

By integrating all three electrical compartments into a factory skid, compact substations reduce site civil installation time from 3 months down to 2 days, saving up to 45% in total project installed costs for EPC contractors and utility developers.

As a direct compact substation factory in China, XinHuan manufactures both European package substations and American pad-mounted configurations with factory-direct pricing, routine FAT testing, and rapid export delivery worldwide.

1. Prefabricated Compact Substation Specification & Selection Table

Standard dimensions, weights, and thermal ratings according to IEC 62271-202. Available in walk-in, non-walk-in, or underground vault configurations.

정격 용량(kVA) 고전압(kV) LV Outgoing Outlets Approx Dimensions L×W×H (mm) Approx Weight (kg) Thermal Enclosure Class
100 kVA 11 / 22 / 33 2 Way MCCB 2,200 × 1,600 × 2,100 2,400 kg Class 10 / Class 15
250 kVA 11 / 22 / 33 2–4 Way MCCB 2,400 × 1,800 × 2,200 3,100kg Class 10 / Class 15
500 kVA 11 / 22 / 33 4–6 Way MCCB 2,800 × 2,000 × 2,400 4,500 kg Class 10 / Class 15
800 kVA 11 / 22 / 33 6 Way MCCB 3,200 × 2,200 × 2,500 5,800kg Class 10 / Class 15
1000 kVA 11 / 22 / 33 6–8 Way MCCB 3,600 × 2,300 × 2,600 6,900 kg Class 10 / Class 15
1250 kVA 11 / 22 / 33 8 Way MCCB / ACB 4,000 × 2,400 × 2,700 8,200 kg Class 10 / Class 15
1600 kVA 11 / 22 / 33 8–10 Way MCCB / ACB 4,500 × 2,500 × 2,800 10,500 kg Class 15 / Class 20
2000 kVA 11 / 22 / 33 10–12 Way ACB 5,000 × 2,600 × 2,900 12,800 kg Class 15 / Class 20
2500 kVA 11 / 22 / 33 12 Way ACB / APFC 5,600 × 2,800 × 3,000 15,400 kg Class 20
3150 kVA 11 / 22 / 33 12–16 Way ACB 6,200 × 3,000 × 3,200 18,900 kg Class 20

2. European Package Substation vs American Pad-Mounted Architecture

특징 European Package Substation (IEC 62271-202) American Pad-Mounted (IEEE C57.12.28)
Compartment Layout 3 Separate Steel Doors (MV RMU, Transformer, LV) Dead-front cabinet attached directly to transformer tank
MV 배전반 유형 SF6 Gas-Insulated RMU or Vacuum Switchgear Internal loadbreak switches & bay-o-net fuses
용량 범위 100 kVA to 3150 kVA 45 kVA to 5000 kVA
변압기 유형 Oil-immersed or Dry-type (Cast Resin) Oil-immersed (Mineral or FR3 vegetable oil)
인클로저 보호 IP23 / IP33 (Trans) & IP54 (RMU / LV) NEMA 3R Tamper-resistant cabinet
Primary Regional Market Middle East, Africa, Europe, Asia, Latin America North America, Central America, Philippines

3. Core Prefabricated Substation Compartments & IAC Arc Safety

Medium-Voltage Compartment (MV RMU)

Houses 11kV, 22kV, or 33kV Ring Main Unit (RMU) switchgear with SF6 gas or eco-friendly air insulation. Includes loadbreak switches, vacuum circuit breakers, cable testing bushings, and relay protection.

Transformer Compartment

Houses a high-efficiency oil-immersed (ONAN) or cast-resin dry-type (AN) transformer with natural louvered ventilation, vibration isolation pads, oil retention tray, and thermal sensors.

Low-Voltage Distribution Compartment

Houses main MCCB/ACB circuit breakers, copper busbars, current transformers (CTs), dual-tariff energy meters, surge arresters, and optional automatic power factor correction (APFC) capacitor banks.

Internal Arc Classification (IAC AB / IAC AFLR 20kA 1s)

Safety for operators and the public is paramount. XinHuan package substations are internal-arc tested according to IEC 62271-202 IAC AB 20kA 1s. In the rare event of an internal arc fault, internal pressure relief flaps channel hot arc gases downward into the civil cable trench, preventing door blowout or lateral gas projection.

4. Site Civil Foundation, Cable Trenching & Installation Guide

Installing a prefabricated compact substation requires minimal site preparation compared to traditional brick-and-mortar substations:

  1. Reinforced Concrete Pad Preparation
    Cast a 250mm reinforced concrete slab rated for the total substation weight (e.g. 8,000 kg). Ensure 150mm clearance above final ground level to prevent floodwater ingress.
  2. Cable Trenching & Bottom Entry Seals
    Construct a central cable trench beneath the MV and LV compartments. Cable entry glands and neoprene seal modules (IP54 rated) prevent water and rodent entry.
  3. Grounding Grid Connection (< 1 Ohm)
    Bond the substation steel base frame to the site earth grid using dual 50x6mm copper tape conductors. Verify earth resistance is below 1.0 Ohm before energization.

5. Frequently Asked Questions (Compact Substation Procurement)

IEC 62271-202 (High-voltage switchgear and controlgear - Part 202: High-voltage/low-voltage prefabricated substation) is the international standard governing package substations. It defines internal arc safety tests, enclosure IP ratings, ventilation thermal limits, and mechanical withstand.

A European Package Substation features 3 distinct, accessible walk-in/non-walk-in metal compartments housing the MV Switchgear (RMU), Transformer, and LV Distribution Board separately. An American Pad-Mounted Transformer combines the transformer tank and compartmentalized dead-front HV/LV cable connections inside a single low-profile enclosure.

The transformer compartment typically uses IP23 or IP33 for natural ventilation cooling, while the MV switchgear (RMU) and LV distribution board compartments are sealed to IP54 or IP65 to prevent dust, rain, and humidity ingress.
A large grey electrical transformer with metal pipes and cables in a substation

엔지니어링 계산기

Calculate kVA load sizing or evaluate IEC loss cost lifecycle savings for your substation project.

변전소 견적 요청

Custom 3-compartment layout, single-line diagrams (SLD), and FOB/CIF price delivery in 24h.

Get Substation Quote →

품질 및 규정 준수

인증된 B2B 제조 및 실험실 성능

모든 변압기, 소형 변전소 및 스위치기어 장치는 감사를 받은 ISO 품질 관리 시스템에 따라 설계되었으며 IEC 60076 및 ANSI C57 국제 표준에 따라 유형 테스트를 거쳤습니다.

IAF / CNAS 인증

ISO 9001:2015 품질 시스템

10kV~35kV 배전 변압기의 설계, 코일 권선, 진공 건조, 오일 충전 및 일상 테스트를 포괄하는 인증된 품질 관리 시스템입니다.

환경시스템

ISO 14001:2015 환경

저손실 친환경 설계 코어 어셈블리, 제로 PCB 절연유 및 환경적으로 안전한 생산 관리를 인증하는 환경 관리 시스템입니다.

산업 보건

ISO 45001:2018 안전 시스템

산업 보건 및 안전 관리 시스템은 고전압 테스트 베이 및 공장 조립 프로토콜의 안전 격리를 보장합니다.

CNAS 실험실 유형 테스트

IEC 60076 및 GB 유형 테스트

CNAS 공인 국가 연구 기관에서 수행된 완전한 루틴 및 유형 테스트 기록(온도 상승, 임펄스 전압 내구성, 단락 내구성).

SGS 감사를 받은 공급업체

SGS 검증 제조업체 감사

제조 현장, 수출 능력, 조립 라인 및 법적 자격을 검증하는 SGS/Made-in-China의 현장 공장 감사 인증서입니다.

≥180개/년 수출

국제배송증명서

해외 전력망 EPC 및 산업 인프라 프로젝트(모잠비크, 나이지리아, 케냐, SEA)에 대한 연간 공급 실적 및 납품 인증서를 검증했습니다.

WhatsApp