Ready to Proceed?
Request a Firm Quotation for 31.5 MVA 110kV Semi-Trailer Mounted...
Share your project specifications and receive an official CIF quotation within 24 hours.
Compact Substations
Mobile Substations
SKU: 110KV_31_5MVA_SEMI_TRAILER_MOUNTED_MOBILE_SUBSTATION
31.5 MVA 110kV Semi-Trailer Mounted Mobile Transformer Substation
XinHuan 31.5 MVA Semi-Trailer Mounted Mobile Transformer Substation. Complete containerized substation on heavy-duty multi-axle chassis with integrated GIS, power transformer, / switchgear, and microclimate control cabin for emergency grid restoration and temporary mining/utility power.
Compliance Standards
IEC • ANSI • IEEE • GB
Quality Inspection
100% FAT Routine Tested
Engineering CAD
2D CAD / SLD Schematics
Global Logistics
Direct Seaport CIF Export
Engineering Datasheet
Technical Parameters & Ratings
| Rated Capacity | 31.5 MVA (31,500 kVA) |
|---|---|
| Primary Voltage (HV) | 110 kV (±2×2.5% OLTC / OCTC) |
| Secondary Voltage (LV) | 10.5 kV / 33 kV |
| Rated Frequency | 50 Hz / 60 Hz |
| Cooling Type | ONAN / ONAF (Automated Forced Air) |
| Vector Group | YNd11 / YNyn0 |
| HV Switchgear | 110kV SF6 Gas-Insulated Switchgear (GIS, 31.5kA) |
| MV Switchgear | 10kV / 33kV Metal-Clad Vacuum Switchgear (KYN28 / YRM6) |
| Transport Chassis | Heavy-Duty Multi-Axle Semi-Trailer with Hydraulic Stabilizers |
| Control Enclosure | Walk-In IP54 Microclimate Cabin with SCADA & RTU |
| Standards Compliance | IEC 60076, IEC 62271-200, IEC 62271-202, IEEE C57.12 |
Core
- Rapid Grid Deployment: Full substation commissioning in under 24 hours for emergency restoration, grid maintenance bypass, and remote mining sites.
- Multi-Axle Heavy-Duty Transport Chassis: Compatible with Sitrak/heavy tractor trucks, engineered for cross-country highway and unpaved terrain transport.
- Hermetic SF6 Gas-Insulated Switchgear (GIS): Compact footprint with high impulse withstand and maintenance-free operation.
- Integrated Microclimate SCADA Control Cabin: IP54 temperature-controlled operator room with protection relays, remote telemetry, and auxiliary AC/DC distribution.
- Dual Cooling System: ONAN/ONAF high-efficiency radiators with automated low-noise forced air cooling for continuous full-load operation in ambient temperatures up to 50°C.
Engineering Submittal & Layout Workbench
Substation Room Fit & Multi-Equipment CAD Footprints
Select your equipment type and capacity to inspect verified GA engineering CAD line drawings, Single Line Diagrams (SLD), dimensions (L × W × H), roller gauge, and submittal clearances before procurement.
Available Ratings:
11kV / 33kV Dual Voltage
IEC 60076 / IEEE Compliant
100% Routine Factory Tested
Export Nitrogen / Seaworthy Pack
1000 kVA Technical Dimensions
IEC 60076-1International utility & industrial submittal specifications
| Overall Length (L) | 1,750 mm |
|---|---|
| Overall Width (W) | 1,120 mm |
| Overall Height (H) | 1,780 mm |
| Roller Wheel Track Gauge (D) | 820 mm |
| Total Equipment Net Weight | 3,820 kg |
| Min Substation Clearance | 1,000 mm surrounding |
| Rated Voltage / System | 11 kV / 33 kV Dual Primary |
| Applicable Standard | IEC 60076-1 / IEEE C57 |
Download Technical Data Sheet (PDF)
Request Factory Engineering Submittal Package
Full CAD DXF/DWG vector footprints, 3D STEP models, and custom project submittals provided within 2 hours upon request.
XinHuan Hefei Manufacturing Plant — Precision Winding & Assembly Line
Factory Build Quality
Internal Construction & Premium Materials
Built with tier-1 certified raw materials engineered for long operational life (>30 years), superior dielectric withstand, and high short-circuit withstand capacity.
Silicon Steel Core
High-grade grain-oriented cold-rolled silicon steel with step-lap mitered joints for low $P_o$ losses.
100% Copper Windings
Electrolytic oxygen-free copper with high thermal grade insulation for surge resistance.
Precision Tap Changer
De-energized tap switch ($\pm 2 \times 2.5\%$) or on-load vacuum tap changer (OLTC) optional.
Protection & Sensors
Buchholz gas relay, magnetic oil gauge (MOG), and dial thermometers with alarm contacts.
Quality Assurance
CNAS & ISO 9001 Certified
100% Factory Acceptance Testing (FAT) Protocol
Every transformer unit manufactured by XinHuan undergoes mandatory routine factory testing prior to container dispatch. Full certified routine and type test submittal reports are provided with commercial documentation:
1. Insulation Resistance
Megger test (HV to LV, HV to Earth, LV to Earth) >1000 MΩ.
2. Voltage Ratio & Vector
Turns ratio check across all taps with phase displacement check.
3. Winding DC Resistance
Precision Kelvin bridge measurement across all tap positions.
4. Short-Circuit Impedance
Load loss ($P_k$) measurement corrected to reference temp (75°C).
5. No-Load Loss & Current
Core excitation test ($P_o$ and $I_o$) at rated sinusoidal voltage.
6. AC Voltage Withstand
Power-frequency separate source test (e.g. 50kV/70kV 1 min).
7. Lightning Impulse (BIL)
Full wave & chopped wave impulse withstand (BIL up to 170kV).
8. Partial Discharge & Seals
Ultra-low discharge (<5 pC) and pressurized oil/gas tightness test.
Logistics Intelligence
Global CIF / FOB Delivery
Export Packaging & Seaport Logistics
Heavy-duty export packing with moisture-proof wrapping & transport securing
Production Lead Time
Standard manufacturing cycle is 4 to 6 weeks from approval of GA blueprints and single-line diagrams.
Heavy-Duty Export Packaging
Vacuum moisture barrier preservation, nitrogen blanketing, and reinforced steel-frame structural crate skids.
Direct Seaport Routes
Fast ocean freight to Port of Chancay & Callao (25-35 days), Manila, Lagos, and Middle East ports.
Equipment Video Inspection
100% TestedWatch XinHuan technicians perform routine dielectric testing, winding insulation checks, and quality inspections inside our Hefei manufacturing plant.
Every unit 100% routine tested before container loading.
Direct Factory Consultation
Need Custom Project Engineering?
Send your single-line diagram (SLD), voltage ratings, or tender specifications. Our chief electrical engineers will review and issue an actionable CIF quotation within 24 hours.
Custom Voltage Ratios
High-Altitude Derating
Short-Circuit Impedance
Third-Party FAT Witness
Engineering & Procurement FAQs
Frequently asked questions regarding specifications, certifications, and delivery for 31.5 MVA 110kV Semi-Trailer Mounted Mobile Transformer Substation.
Contact XinHuan engineering team for customized mobile substation designs.
IEC 60076, IEC 62271-200, IEC 62271-202, IEEE C57.12
Standard manufacturing lead time is 4 to 6 weeks following approval of GA blueprints and single-line diagrams. Direct sea container shipping is available under FOB, CFR, or CIF terms with full customs documentation (Bill of Lading, Certificate of Origin, Test Reports).