Solar PV & Wind Step-Up Transformers — IEC 60076-16 Specs

Renewable Energy Guide

Solar PV & Wind Step-Up Transformers

Engineering specification manual for solar PV inverter step-up transformers, wind farm collector transformers, and Battery Energy Storage System (BESS) transformers. Built to IEC 60076-16 inverter duty standards with dual/quad LV windings and C5-M anti-corrosion protection.

De autoria da equipe sênior de engenharia elétrica VERIFICADO E CERTIFICADO EM GORDURA
Laboratório de transformadores de alta tensão de Hefei · Conformidade com os padrões IEC 60076 e IEEE C57 · Atualizado em outubro de 2026

Solar power generation introduces unique electrical and environmental stresses compared to traditional grid transformers. Solar step-up transformers (IEC 60076-16) must operate under continuous high ambient temperatures, process high-frequency inverter harmonics, withstand DC voltage bias, and endure severe daily thermal expansion cycles.

XinHuan solar transformers step up low voltage from central solar inverters (0.6kV, 0.69kV, 0.8kV, 1.1kV) directly to medium-voltage collector grids (11kV, 20kV, 33kV, 35kV) with maximum efficiency and minimum lifetime losses.

1. Solar PV Step-Up Transformer Technical Specification Table

Guaranteed performance parameters according to IEC 60076-16 at 50°C solar ambient rating. Available in Dyn11, Dy11y11 (Dual LV), or Dy11y11y11 (Quad LV) vector configurations.

Capacidade Nominal (kVA) Tensão AT (kV) Tensão LV (V) LV Winding Config No-Load Loss (W) Load Loss (W) Impedância Reino Unido (%) Método de Resfriamento
1000 kVA 11 / 20 / 33 / 35 600 / 690 / 800 Single or Dual LV 1,120 8,450 6.0 / 6.5 ONAN / ONAF
1600 kVA 11 / 20 / 33 / 35 600 / 690 / 800 Single or Dual LV 1,580 12,200 6.5 / 7.0 ONAN / ONAF
2000 kVA 11 / 20 / 33 / 35 600 / 690 / 800 Dual LV (Dy11y11) 1,890 14,800 7.0 / 8.0 ONAN / ONAF
2500 kVA 11 / 20 / 33 / 35 690 / 800 / 1100 Dual LV (Dy11y11) 2,280 18,100 8.0 ONAN / ONAF
3150 kVA 11 / 20 / 33 / 35 690 / 800 / 1100 Dual LV (Dy11y11) 2,760 21,900 8.0 / 9.0 ONAN / ONAF
4000 kVA 11 / 20 / 33 / 35 800 / 1100 Quad LV (Dy11y11y11) 3,450 27,200 9.0 / 10.0 ONAN / ONAF
5000 kVA 11 / 20 / 33 / 35 800 / 1100 Quad LV (Dy11y11y11) 4,180 33,500 10.0 ONAN / ONAF
6300 kVA 11 / 20 / 33 / 35 800 / 1100 Quad LV (Dy11y11y11) 5,120 41,000 10.0 / 12.0 ONAN / ONAF

2. Dual & Quad LV Winding Isolation (Inverter Duty)

Modern solar farms utilize multiple high-capacity central inverters connected to a single transformer to lower balance-of-plant (BOP) balance sheet costs.

Galvanic Isolation Between Inverters

XinHuan solar transformers feature split low-voltage windings (Dy11y11 vector group). Each LV winding is galvanically isolated from the other, preventing circulating currents between separate inverter modules and eliminating harmonic interference across solar arrays.

DC Bias & Electrostatic Shielding

PV inverters can inject slight DC offset currents into transformer windings, causing magnetic core saturation. XinHuan designs feature oversized magnetic cores with reduced flux density and grounded electrostatic copper shields between HV and LV windings to divert high-frequency switching noise.

3. Harsh Outdoor Environment & C5-M Anti-Corrosion Paint System

Solar farms are predominantly constructed in desert regions with extreme UV radiation and dust storms, or coastal saline environments with aggressive salt spray.

  • C5-M Heavy Marine Paint System: Zinc-rich epoxy primer, intermediate epoxy glass-flake coating, and UV-resistant polyurethane topcoat for 25-year corrosion protection in desert or coastal salt spray environments.
  • High Ambient Temperature Headroom (50°C / 55°C): Standard transformers are rated for 40°C ambient. XinHuan solar transformers feature custom thermal calculation models designed for 50°C to 55°C ambient temperatures without thermal derating.
  • Hermetically Sealed corrugated Oil Tank: Eliminates oil-to-air contact, preventing moisture absorption, oxidation, and oil degradation in remote un-monitored solar farm sites.

4. Integrated Solar Skid Prefabricated Package (Inverter + Transformer + RMU)

To streamline utility-scale solar farm installation, XinHuan supplies factory-assembled Solar PV Skid Substations (Containerized Power Stations):

Central PV Inverters

Pre-wired connections to 1.25MW–3.125MW central solar inverters.

IEC 60076-16 Transformer

Multi-winding step-up transformer (0.8kV -> 33kV / 35kV).

33kV Switchgear RMU

SF6 or Solid-insulated Ring Main Unit with VCB protection.

5. Frequently Asked Questions (Solar & Wind Step-Up)

Solar PV and wind step-up transformers are governed by IEC 60076-16 (Power transformers - Part 16: Transformers for wind turbine applications and solar PV inverter duty). This standard addresses DC current bias, non-sinusoidal harmonic heating, and cyclic solar thermal expansion.

Dual or quad low-voltage (LV) windings allow multiple central solar inverters (e.g., 2 x 1.25 MW or 4 x 625 kW) to connect to a single step-up transformer while maintaining galvanic isolation between inverter channels. This prevents cross-inverter circulating currents and reduces harmonic interference.

XinHuan solar transformers feature C5-M or C5-I heavy marine anti-corrosion paint, high-ambient temperature thermal design (up to 55°C ambient), UV-resistant sealing gaskets, and hermetically sealed corrugated oil tanks or conservator tanks with desiccant breathers.
solar panels on green field

Calculadoras de Engenharia

Calculate kVA load sizing or evaluate IEC loss cost lifecycle savings for your solar project.

Request Solar Spec & Quote

Multi-winding solar step-up transformers, compact PV skids, and fast 24h drawing delivery.

Get Solar Quote →

Qualidade e Conformidade

Fabricação B2B certificada e desempenho de laboratório

Cada transformador, subestação compacta e unidade de manobra é projetado sob sistemas de gerenciamento de qualidade ISO auditados e testado de acordo com os padrões internacionais IEC 60076 e ANSI C57.

Credenciado pela IAF/CNAS

Sistema de Qualidade ISO 9001:2015

Sistema de gerenciamento de qualidade certificado que abrange projeto, enrolamento de bobina, secagem a vácuo, enchimento de óleo e testes de rotina de transformadores de distribuição de 10kV–35kV.

Sistema Ambiental

ISO 14001:2015 Ambiental

Sistema de gestão ambiental que certifica conjuntos centrais com design ecológico de baixa perda, zero óleo de isolamento de PCB e controles de produção ambientalmente seguros.

Saúde Ocupacional

Sistema de Segurança ISO 45001:2018

Sistema de Gestão de Saúde e Segurança Ocupacional garantindo contenção de segurança em baias de testes de alta tensão e protocolos de montagem em fábrica.

Testes de laboratório CNAS

Testes de tipo IEC 60076 e GB

Registros completos de testes de rotina e de tipo (aumento de temperatura, resistência à tensão de impulso, resistência a curto-circuito) realizados em institutos de pesquisa nacionais credenciados pelo CNAS.

Fornecedor auditado SGS

Auditoria de fabricante verificada pela SGS

Certificado de auditoria de fábrica no local pela SGS / Made-in-China, verificando instalações de fabricação, capacidade de exportação, linhas de montagem e qualificação legal.

≥180 unidades/ano de exportação

Certificado de Entrega Internacional

Desempenho de fornecimento anual verificado e certificado de entrega para projetos EPC de redes elétricas no exterior e projetos de infraestrutura industrial (Moçambique, Nigéria, Quênia, SEA).

WhatsApp